\n
[One-point advice for new FAEs] About the development environment<\/strong><\/p>\n\n\n\n\n
\n
\n
The downloaded development environment can be used not only for evaluation but also for mass production development.
Project Creation<\/strong><\/h2>\n\n\n\nChapter 2: Starting a new project<\/strong><\/p>\n\n\n\nThis chapter explains how to start LEXIDE-\u03a9 and create a new project.<\/p>\n\n\n\n
\nFrom the Windows Start menu, select LAPIS LEXIDE Tools \u2192 LEXIDE-\u03a9 and set up your workspace.<\/li>\n\n\n\n After launching LEXIDE-\u03a9, select \u201cFile\u201d \u2192 \u201cNew\u201d \u2192 \u201cProject\u201d.<\/li>\n\n\n\n In the New Project dialog, select \u201cC Project\u201d.<\/li>\n\n\n\n C In the Project dialog, enter the project name in \u201cProject name\u201d and Select \u201cNEXT\u201d in the Select Configurations dialog.<\/li>\n\n\n\n In the Select U8\/U16 Device dialog, select the following: Finally, delete the startup file (in this case, ML621577.ASM) from the created project.<\/li>\n<\/ol>\n\n\n\nNow you are ready to perform the initial setup of the Code Generation Tools.<\/p>\n\n\n\n
Chapter 3 Initial setup with Code Generation Tools<\/strong><\/p>\n\n\n\nIn this chapter, we will use the Code Generation Tools to perform initial settings and peripheral function settings.<\/p>\n\n\n\n
\nFrom the Windows Start menu, select LAPIS Code Generation Tools \u2192 Once launched, select "New Project" and select ML62Q1577 256K 100 TQFP100.<\/li>\n\n\n\n You will be taken to a screen to save the project file, so enter the project file name andSave it under the project folder created in Chapter 2.<\/mark><\/code><\/li>\n\n\n\nThis time, do not make any changes and select "Generate source files" to generate source files.Now that the initial settings are complete, the next step is to configure the peripheral functions.<\/mark><\/code><\/li>\n\n\n\nFrom the Windows Start menu, select LAPIS Code Generation Tools \u2192 Once launched, select "New Project" as before and select ML62Q1577 256K 100 TQFP100.<\/li>\n\n\n\n You will be taken to a screen to save the project file, so enter the project file name andSave it under the project folder created in Chapter 2.<\/mark><\/code><\/li>\n\n\n\nConfigure the settings as shown below, select "Generate source files" and generate source files.The initial setup of the Code Generation Tools is now complete.<\/p>\n\n\n\n
Chapter 4 Writing source code with LEXIDE-\u03a9<\/strong><\/p>\n\n\n\nThis chapter explains how to start LEXIDE-\u03a9 and write source code.<\/p>\n\n\n\n
\nOpen the project file you created, \u201clcgu_src\u201d \u2192 \u201clcgu_main.c\u201d.<\/li>\n\n\n\n Write \u201ctimer0_start()\u201d under \u201cs_initUser()\u201d.<\/li>\n\n\n\n Open \u201clcgu_src\u201d \u2192 \u201clcgu_timer0.c\u201d.<\/li>\n\n\n\n Write "P20DO = ~P20DO" under "void lcgu_procTimer0Int(void)".\nNow that we have written the source code, we will build it in the next chapter.<\/p>\n\n\n\n
Chapter 5 Building the project you created<\/strong><\/p>\n\n\n\nThis chapter explains the steps to build a project created with LEXIDE-\u03a9.<\/p>\n\n\n\n
\nFrom the LEXIDE-\u03a9 menu, select \u201cProject\u201d \u2192 \u201cProperties\u201d.<\/li>\n\n\n\n Select \u201cC\/C++Build\u201d \u2192 \u201cSettings\u201d \u2192 \u201cCompiler\u201d \u2192 \u201cIncludes\u201d.<\/li>\n\n\n\n Click the \u201cAdd directory path\u201d icon and then select \u201cWorkspace\u201d.<\/li>\n\n\n\n Select a folder in the Folder selection dialog and click "OK"."inc" folder, "lcg_src" folder, and "lcgu_src" folder<\/mark><\/code>Select multiple items.<\/li>\n\n\n\nSelect \u201cApply and Close\u201d.<\/li>\n\n\n\n From the LEXIDE-\u03a9 menu, select \u201cProject\u201d \u2192 \u201cBuild Project\u201d to build the project you created.<\/li>\n<\/ol>\n\n\n\nYou have now built the project you created.<\/p>\n\n\n\n
Debugging<\/h2>\n\n\n\n Chapter 6 Debugging the created project<\/strong><\/p>\n\n\n\nThis chapter explains the procedure for debugging a project built with LEXIDE-\u03a9.<\/p>\n\n\n\n
\nConnect the reference board, emulator, and PC.<\/li>\n\n\n\n Select "Debug" from the toolbar (\u2460 below), select the target to debug (\u2461 below), and click the Debug button The Confirm Perspective Switch dialog will appear, so click \u201cSwitch\u201d to move to the debug screen.<\/li>\n\n\n\n Once you are on the debug screen, click the Resume button on the toolbar. <\/video><\/figure><\/li>\n<\/ol>\n\n\n\nYou have now built the project you created.<\/p>\n\n\n\n
\n
Newbie FAE's first impressions<\/strong><\/p>\n\n\n\n\n
\n
\n
\nI had a bit of trouble with the fact that the code generation tool's startup setting tool and peripheral setting tool were separate.<\/li>\n\n\n\n The manuals for the development environment and code generation tools were written in Japanese and were easy to read.<\/li>\n<\/ul>\n<\/div>\n<\/div>\n<\/div><\/div>\n\n\n\n\n
Purchase the starter kit here\n
Company Profile<\/strong><\/h2>\n\n\n\n\n\tCompany Name<\/dt>\n\t ROHM Co., Ltd.<\/dd>\n\t Established<\/dt>\n\t 1958<\/dd>\n\t location<\/dt>\n\t Kyoto<\/dd>\n<\/dl>\n<\/div><\/div>","protected":false},"excerpt":{"rendered":"* Blinking LED refers to blinking LED. ROHM's Starter Kit (model number: SK-BS01-D62Q157 [\u2026]<\/p>","protected":false},"author":1,"featured_media":0,"parent":9226,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"page_product_otherpage.php","meta":{"_acf_changed":false,"_editorskit_title_hidden":false,"_editorskit_reading_time":0,"_editorskit_is_block_options_detached":false,"_editorskit_block_options_position":"{}","om_disable_all_campaigns":false,"_monsterinsights_skip_tracking":false,"_monsterinsights_sitenote_active":false,"_monsterinsights_sitenote_note":"","_monsterinsights_sitenote_category":0,"footnotes":""},"class_list":["post-9229","page","type-page","status-publish","hentry"],"acf":[],"aioseo_notices":[],"_links":{"self":[{"href":"https:\/\/shinko-sj.co.jp\/en\/wp-json\/wp\/v2\/pages\/9229"}],"collection":[{"href":"https:\/\/shinko-sj.co.jp\/en\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/shinko-sj.co.jp\/en\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/shinko-sj.co.jp\/en\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/shinko-sj.co.jp\/en\/wp-json\/wp\/v2\/comments?post=9229"}],"version-history":[{"count":16,"href":"https:\/\/shinko-sj.co.jp\/en\/wp-json\/wp\/v2\/pages\/9229\/revisions"}],"predecessor-version":[{"id":9259,"href":"https:\/\/shinko-sj.co.jp\/en\/wp-json\/wp\/v2\/pages\/9229\/revisions\/9259"}],"up":[{"embeddable":true,"href":"https:\/\/shinko-sj.co.jp\/en\/wp-json\/wp\/v2\/pages\/9226"}],"wp:attachment":[{"href":"https:\/\/shinko-sj.co.jp\/en\/wp-json\/wp\/v2\/media?parent=9229"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
![\"\"](\"\/wp2024\/wp-content\/uploads\/2025\/03\/lchika_01.png\")
<\/figure><\/div>\n\n\n![\"\"](\"\/wp2024\/wp-content\/uploads\/2025\/03\/lchika_02.jpg\")
<\/figure>\n\n\n\n![\"\"](\"\/wp2024\/wp-content\/themes\/shinko\/assets\/images\/icon_teacher.svg\"){kind=icon}
<\/figure>\n<\/div>\n\n\n\n![\"\"](\"\/wp2024\/wp-content\/uploads\/2025\/03\/lchika_03.png\")
<\/figure><\/div>![\"\"](\"\/wp2024\/wp-content\/uploads\/2025\/03\/lchika_04.png\")
<\/figure><\/div><\/div><\/li>\n<\/ol>\n\n\n\n![\"\"](\"\/wp2024\/wp-content\/uploads\/2025\/03\/lchika_05.png\")
<\/figure><\/div>![\"\"](\"\/wp2024\/wp-content\/uploads\/2025\/03\/lchika_06.png\")
<\/figure><\/div><\/div><\/li>\n<\/ol>\n\n\n\n![\"\"](\"\/wp2024\/wp-content\/uploads\/2025\/03\/btn_debug.png\")
Click (\u2462 below).![\"\"](\"\/wp2024\/wp-content\/uploads\/2025\/03\/lchika_07.png\")
<\/figure><\/li>\n\n\n\n![\"\"](\"\/wp2024\/wp-content\/uploads\/2025\/03\/btn_resume.png\")
Click