Business Introduction

No Touch Frame

Retrofittable contactless technology
No Touch Frame®
play now
play now

*"No Touch Frame" is a registered trademark of Shinko Shoji Co., Ltd.

Shinko Shoji's no-touch frame is now even easier to use
Highly expandable, regardless of size or aspect ratio

The no-touch frame is a simple frame shape.
It can accommodate various display sizes and aspect ratios for monitors, signage, KIOSK terminals, etc.
We will also suggest the installation method. (Available sizes: 10 inch to 80 inch)
This is useful not only when considering a new model, but also when installing it on an existing monitor or terminal.
It is possible to make it contactless later.

Dedicated driver
No software required

There is no need for dedicated driver software, which is common with sensors that serve as user interfaces.
The no-touch frame is USB-HID compliant,
You can easily achieve contactless operation by simply connecting a USB cable to a PC or control device.

Since it is a USB-HID class interface, it can be operated without contact.
It can be operated on par with other interface devices.
(Supported OS: Windows 7 OS Service Pack 1 or later)

Unique technology for high operability and response speed

The no-touch frame uses an infrared camera module
Our proprietary technology complements this imaging function with firmware, enabling seamless contactless operation.
There is virtually no slow response time or timing issues that are common with contactless technology.
*Detection rate 100pps (No-touch frame W is 50pps)

In addition, the "No Touch Frame W" has a detection line that is 30-50mm above the LCD screen,
There is also another detection line located near the LCD surface.
This makes it possible to operate the device even if you accidentally touch the LCD screen.
The device can be operated by simply inserting or removing a finger between these two detection lines.
This provides the same operating experience as a touch panel, without having to move your fingers far away from the LCD screen.

Resistant to extraneous light!
High light resistance

The following features have been implemented to provide high resistance to ambient light.

The camera module, which combines the infrared emitter and receiver, is located at the back of both top left and right corners where it is less susceptible to external light (sunlight).

The infrared light is not emitted continuously, but is emitted and received at high speeds to trigger a shutter. This prevents halation from occurring even if ambient light enters the camera module.

A special material called retroreflective tape is used as the reflective material, which reflects only in the direction the light is incident. Light incident from the side is reflected back to the incident side, making it less susceptible to the effects of external light.

The lens of the sensor of the No-Touch Frame is designed so that the wide angle and elevation angle captures only the reflection of the reflective tape. More than 80% of the reflected light is reflected back in the direction it came from, greatly reducing the amount of reflected light captured by the camera module.

Improved maintainability

The three bottom left and right sides of the no-touch frame are inclined
The design makes it difficult for dust and dirt to accumulate and easy to clean.
The screen is larger, making it easier for users to see.
Furthermore, the shape of the bottom makes it difficult to place items such as umbrellas or receipts on it.
These features greatly improve operability after installation.

Because it is a frame,
easy to use!

Our no-touch frame is a frame that surrounds the LCD screen on all four sides.
One of its features is that it makes it easy for the user to actually operate the device to know "where to stop."

Non-contact operation is possible because there is no object that the user can touch, such as a touch panel.
"Where should I stop my hand?" or "How deeply should I insert and remove my fingers?"
However, it has a weakness in that it is difficult to understand.
No-touch frames have a physical frame, so users can see
You can see its location and depth.

Applications
scene
  • ATM
  • Ticket machine
  • Ticket payment machine
  • Self-checkout
  • Reception terminal
  • Signage
Introduction video
movie
  • Non-contact operation "No Touch Frame W" makes it even easier to use! Intuitive operability!

    Video release date: 2022/10/05

  • Non-contact. Easy to install on touch panels. Infection prevention. "No-touch frame"

    Video release date: June 2, 2021

Case studies
case
  • Elcom Co., Ltd.

    Our products have been adopted by Elcom Co., Ltd. for two of their ticket vending machines, which have been well received for their employee cafeterias.
    https://www.elcom-net.co.jp/

  • Meiko Shokai Co., Ltd.

    Meiko Shokai Co., Ltd. has adopted our product as a ticket issuing monitor for their MS Voice Call NEO (reception desk information system). It is also used by medical institutions and local government customers.

  • Armex Co., Ltd.

    ALMEX Corporation has adopted our product for their hospital's repeat visit reception machine, the APS-3300. It is used at the reception desk of medical institutions where a clean appearance is essential.

  • JR East Information Systems Co., Ltd.

    JR East Information Systems Co., Ltd. has adopted our technology for their "AI Guidance Signage," which uses AI to provide guidance within their facilities.
    https://www.jeis.co.jp/product/jeissignage/

For inquiries regarding this project, please contact:

For inquiries regarding this project, please contact:

Telephone enquiries

New Business Sales Department

03-6361-8085

Reception hours: Weekdays from 9:00am to 5:00pm

Contact by email

Inquiry Form