The no-touch frame is a simple frame shape.
It can accommodate various display sizes and aspect ratios for monitors, signage, KIOSK terminals, etc.
We will also suggest the installation method. (Available sizes: 10 inch to 80 inch)
This is useful not only when considering a new model, but also when installing it on an existing monitor or terminal.
It is possible to make it contactless later.

There is no need for dedicated driver software, which is common with sensors that serve as user interfaces.
The no-touch frame is USB-HID compliant,
You can easily achieve contactless operation by simply connecting a USB cable to a PC or control device.

Since it is a USB-HID class interface, it can be operated without contact.
It can be operated on par with other interface devices.
(Supported OS: Windows 7 OS Service Pack 1 or later)

The no-touch frame uses an infrared camera module
Our proprietary technology complements this imaging function with firmware, enabling seamless contactless operation.
There is virtually no slow response time or timing issues that are common with contactless technology.
*Detection rate 100pps (No-touch frame W is 50pps)

In addition, the "No Touch Frame W" has a detection line that is 30-50mm above the LCD screen,
There is also another detection line located near the LCD surface.
This makes it possible to operate the device even if you accidentally touch the LCD screen.
The device can be operated by simply inserting or removing a finger between these two detection lines.
This provides the same operating experience as a touch panel, without having to move your fingers far away from the LCD screen.

The following features have been implemented to provide high resistance to ambient light.

The three bottom left and right sides of the no-touch frame are inclined
The design makes it difficult for dust and dirt to accumulate and easy to clean.
The screen is larger, making it easier for users to see.
Furthermore, the shape of the bottom makes it difficult to place items such as umbrellas or receipts on it.
These features greatly improve operability after installation.

Our no-touch frame is a frame that surrounds the LCD screen on all four sides.
One of its features is that it makes it easy for the user to actually operate the device to know "where to stop."

Non-contact operation is possible because there is no object that the user can touch, such as a touch panel.
"Where should I stop my hand?" or "How deeply should I insert and remove my fingers?"
However, it has a weakness in that it is difficult to understand.
No-touch frames have a physical frame, so users can see
You can see its location and depth.